I have broken 2 bandsaw blades. The first one I thought it was just Poor construction weak spot. The second one just surprised me. I figured I am doing something wrong. I would like a little help getting me back on track so I don't break another bandsaw blades. Hopefully it's not operators ?.
My bandsaw is grizzly model GX 555 LX with a riser bar blade is 105 inches blades. I am trying to make a sled And reindeer for Christmas out of a 4 x 4 pieces 2X4 pieces of pine I am using a Carter stabilizer guide.
My blades are 105 inches long. The blade is : width 0.125. The thickness is 0.025. The tooth is regular 14 TPI.I am also using a Carter stabilizer on my bandsaw
I would appreciate any help on trying to figure out what I'm doing wrong. Hopefully it's not me trying to go too fast or some other operator problem ?
Dave
blade used on bandsaw.jpgCarter stabilizer.jpg4 x 4 pine block.jpgbandsaw with riser.jpg
Reply With Quote