Hi everyone,
I have an epilog mini 24 which I bought used 5 years ago and I'm out here trying to figure out if I indeed have an Air Assist system in my laser or not.
Near the cutting head there is a little metal pipe, curved down towards the laser target area. the pipe is preceded by a thin rubber hose which is coiled and runs back along the gantry towards the rear of the machine. From what I can tell it's at least SET UP to have air assist. But whether I have it or not I don't actually know.
So, long and short of it - how do you to tell if your machine has Air Assist?
It seems to be in the same vein as how you can currently buy a Base model Jeep Wrangler WITHOUT air conditioning, but the AC button will still be there from the factory. so if you have never experienced air conditioning you wouldn't know whether it came with it or not, unless you look at the sales sheet.
Sorry if this sounds kinda dumb...
0l0id