Question about solid wood drawer faces. I know its a little overkill but I have some leftover quarter sawn African Mahogany from trimming out the living room and was thinking of using for drawer faces on my router cabinet.
Bottom left drawer face would be about 14-1/2" high so would be two pieces edge glued.
The wood I have is 4/4 and I would like to leave the faces rather thick (around 3/4") because I would plan to rout the bottom inside edge with a cove to form a pull.
Drawers are plywood.
I guess I am mostly worried about the larger drawer as far as wood movement. With the wood be quartersawn I don't know how concerned I should be.
Reply With Quote