So I’ve been breaking down 16 sheets of ply into 70 pieces for a bunch of cabinets using my Mikita track saw. No matter what I try I can’t get a square cut and I’m off about a 1/16th -1/8th on 3 ft. I usually draw a line with my woodpecker T square (checked it for square), line track up, then I use my starrett 12” square to double check (checked it for square). I’ve also ripped a straight line first on the square edge so I’m not referencing a factory edge. Then I use clamps to hold down and recheck everything before cutting. I’ve used 3 different tracks so can’t be the track. I don’t feel play with the saw on the track as far as I can tell.
Could it be the blade? The factory set toe-in maybe? I do think the 90 degree setting is off slightly but that wouldn’t effect squareness of the cut right?
anyone have any ideas?