Introduction and Stuck Milwaukee 5625 Router Collet

[Richard Coers]

This^^^^^

Looks like there is enough collet sticking out to use pliers and twist and pull.

In my experience it takes a hard rap. I've had some with just the slightest bit of corrosion and it's like they are welded in. No way would soft grip pliers jaws spin it.

[Steve Clardy]

In my experience it takes a hard rap. I've had some with just the slightest bit of corrosion and it's like they are welded in. No way would soft grip pliers jaws spin it.

If you will notice, 'I' mentioned pliers, not soft jaw pliers.