https://www.victornet.com/tools/Bime...Coils/331.html This is where I have purchased my bandsaw blade material. I made a small fixture to clamp the stock and file a 20* angle along the face. I used to cut the blades with aviation snips. It would roll the edge of the stock and not match up. Now I use a dremmel with a cut off blade. It makes a cleaner/flat cut. Alignment is perfect now!https://www.youtube.com/watch?v=qnSt3XlwgOc This little video pretty much explains my procedure. My set up and process is a little more precise, and doesn't use as much heat. I also don't grind away any teeth.
It is not difficult to get set up and make up or repair your blades.