The General 12” lathe is well designed and easy to operate. This lathe is lightly used and excellent condition.
Features
* High quality ribbed cast-iron headstock, tailstock, and bed.
* Precision-machined bed guideways allow the tailstock and tool rest to slide smoothly.
* Precision-machined, high quality steel spindle, mounted on sealed, permanently lubricated bearings.
* Equipped with plunger-type pin indexing mechanism for reeding and fluting
* Removable headstock cover for access to the spindle and indexing mechanism.
* Powerful North American designed, totally enclosed, fan cooled industrial motor (Leeson), 115V
* Push-button switch on/off
* Increase or decrease speed without stopping the machine using the front mounted control lever (500-3000 RPM)
Included Accessories
* Spur center
* Live center
* 4” tool rest
* 12” tool rest
* 3” diameter face plate
* 5 turning-tool set
* Inside-outside caliper
Specifications
Swing Over Bed: 12”
Swing Over Bed Gap: 15”
Distance Between Centers: 38”
Length (Bed); 58”
Height Center of Spindle to Floor: 41”
Motor: 115V, 60Hz, 1 HP, 1 PH, 12.8A
Weight: 321 lbs.
Located in Southeastern Virginia (Yorktown)
$1350