Sharpening carbide router bits

[kevin nee]

Where can I get carbide router bits sharpened?

[Bruce Wrenn]

Where can I get carbide router bits sharpened?

Dynamic Saw in Buffalo NY. As of this posting, their web site is experiencing problems. Been using them for my saw blades for years, without any problems.

[Robert Hayward]

Dynamic is a good one. Ridge Carbide also will do router bits.

[Richard Coers]

Be aware that a sharpened router bit is not longer the same diameter as before. So if you use them for dados, well you know.

[Tom M King]

I send mine back to Whiteside.

edited to add: but it's been a long time since I needed any sharpened.

[mike calabrese]

you can do a pretty decent job with these and some wd40 for lube.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
calabrese55

[Cameron Wood]

you can do a pretty decent job with these and some wd40 for lube.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
calabrese44

That's what I do as well.

[Keith Pitman]

That’s what I use also. Count your strokes and give the same number to each side. Only sharpen the flat side.

you can do a pretty decent job with these and some wd40 for lube.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
calabrese44