Anyone have experience cutting Corian? Looking to replace our stove and the existing opening measures 29 7/8" wide. The stove we are considering is 29 15/16" wide and the manufacturer recommends a 30" opening. The Corian is laminated with a 1/2" top layer and a 1" layer set back about 1/8" so I think I can just remove 1/8" from the top 1/2" layer. What's the best method? I have circ saw, router, belt sander, ROS and 4" grinder with a diamond blade.Corian.jpg
Thanks for the suggestions, looks like I dodged the bullet. Went back and rechecked the dimensions and determined that it will fit without modifying the top opening. One of the dimensions I assumed was at the countertop elevation is actually at the base so I have about 1/8" clearance at the countertop so no trimming required.