Picture Frames

[Eric Brown]

I wanted to make picture frames for a bunch of posters and so I looked at all my woodworking books. Basically they all said a "proper" picture frame MUST HAVE mitered corners. No exposed end grain. However, the first one I did was for the Anarchist Tool Chest. Nothing seem right. I decided to follow a Chis Schwarz's saying "Disobey me". Looking at the poster I realized that the chest lid itself would make a good picture frame. It uses mortice & tenon joinery, which is very strong. Decide to make all the frames in a similar fashion out of different woods. Pined the joints, either one or two pins with the pins being a different wood. All the edge were beveled to minimize dust buildup. I used a dark beeswax finish on them. Even though they are not proper, most people like them. They will not fall apart. (So now you can also see that I do woodworking on occasion.)

Quilted Maple

Maple.jpg

Walnut

Walnut.jpg

Sycamore

Sycamore.jpg

Locust

Locust.jpg

Osage Orange

Osage.jpg

[Rafael Herrera]

There's nothing wrong with the type of joinery you used. However, if you want to use a moulded profile, you will have to use a mitered joint.

[Rafael Herrera]

Minimizing the exposure of end grain has a reason. Perhaps is not as relevant in this age where climate control is available. Exposed endgrain as a feature or for ease of construction can be debated.

This is an interesting article.

https://pegsandtails.wordpress.com/2...ail-evolution/

[Von Bickley]

Your frames look great. Miter joints are not required on a picture frame.
Picture Frame.jpg

[Eric Brown]

Minimizing the exposure of end grain has a reason. Perhaps is not as relevant in this age where climate control is available. Exposed endgrain as a feature or for ease of construction can be debated.

This is an interesting article.

https://pegsandtails.wordpress.com/2...ail-evolution/

Yes, interesting article. While a mitered corner will slow up moisture it won't stop it. Think of a breadboard end on a tabletop. It has to allow for the wood movement.
On these picture frames the wood is free to move. It's also why there is a gap around the glass. Eng grain will absorb more finish and look somewhat darker, but on these frames it's a bonus. They were donated to a future wood working school as examples.

[Eric Brown]

Your frames look great. Miter joints are not required on a picture frame.
Picture Frame.jpg

Your frames look nice as well. Good job.

[glenn bradley]

I think they look great. Love the subject matter too.

Shayna and Blake Frame v2 (21).jpg

Mitered corners are definitely not a requirement.

[Rob Luter]

I've made quite a few frames for pictures and tiles and most aren't mitered. There are so many more options that way.

[Eric Brown]

I think they look great. Love the subject matter too.

Shayna and Blake Frame v2 (21).jpg

Mitered corners are definitely not a requirement.

Thanks. Was wondering if anyone would notice the subjects.