So I have a SS CTS that I want to add a slightly longer extruded aluminum fence onto. I want it no more than 1/2" thick so it doesn't overwhelm the stock fence mechanics. Can someone suggest which 8020 I should be considering? Thanks for the help.
[OP]
Contributor
So I have a SS CTS that I want to add a slightly longer extruded aluminum fence onto. I want it no more than 1/2" thick so it doesn't overwhelm the stock fence mechanics. Can someone suggest which 8020 I should be considering? Thanks for the help.
Contributor
Im not sure 1/2" exists. 1x3 or 25x75 are pretty standard. Misumi doesnt offer anything that thin.
I think the only place to find auxilary fences may be something like Woodpeckers super track. Its .7" x3.85"
https://www.woodpeck.com/woodpeckers-super-track.html
Member
McMaster has a 2" wide 1/2" thick one or a 3" wide 3/4" thick one:
https://www.mcmaster.com/products/al...file-two-slot/
[OP]
Contributor
Bert, I think that's the closest I've seen yet, however the 1/2" only comes in a 2" height. I'd need a 3 to 4" height. Good try though.Originally Posted by Bert McMahan
Last edited by Derek Arita; 10-20-2023 at 5:15 PM.
Contributor
Here is an aluminum extrusion that is 120 x 160 (about 4-3/4" x 5/8").
https://ee-product.item24.com/en/pro...natural-65086/
I don't know pricing. You will have to contact them by phone.
Contributor
I installed this on my SawStop PCS:
https://www.amazon.com/gp/product/B0...f_=as_li_ss_tl
Posting Permissions
Reply With Quote