Results 1 to 10 of 10

Thread: Remote Control Christmas Light time of year

  1. #1
    Join Date
    Jan 2011
    Location
    Montfort, Wi.
    Posts
    805

    Remote Control Christmas Light time of year

    Each year we haul out the Christmas lights and inevitably end up with extra transmitters with no remotes, or remotes with no transmitters. It must be the Grinch. Anyway it seems most we get from Menards are Master Electrician. I'm able to find used transmitters and remote control switches on eBay but no where else. I really don't want to discard these parts if I don't have to and buy all new ones. Have any of you come up with a solution? I suspect we're not the only one Mr. Grinch visits.

  2. #2
    Join Date
    Feb 2003
    Location
    McKean, PA
    Posts
    15,662
    Blog Entries
    1
    I would buy one of those small plastic tubs and make sure that all the remotes get placed in that tub at the end of the season for storage.

    Or, attach an apple air tag to each remote so it can be located if it wanders off.
    Lee Schierer
    USNA '71
    Go Navy!

    My advice, comments and suggestions are free, but it costs money to run the site. If you found something of value here please give a little something back by becoming a contributor! Please Contribute

  3. #3
    Join Date
    Jun 2012
    Location
    New Westminster BC
    Posts
    3,019
    Our house has a dedicated "holiday" switched outlet in the soffit near the front door with the switch inside. I installed a smart switch so I can control our yard lights including Christmas lights without any transmitters or remotes to put away and lose. The outlet is programmed to come on at dusk and off at dawn and since it is a smart switch it adjusts for sunrise and sunset times.

  4. #4
    Zip Lock bags, one for each remote and control. A few years back, I controlled the air cleaner with a remote. Every time I turned air cleaner on, outside lights at house came on. But turning lights on or off in house didn't affect air cleaner. Changed frequencies on remote in shop - problem solved.
    Last edited by Bruce Wrenn; 11-28-2023 at 10:19 PM.

  5. #5
    Join Date
    Mar 2016
    Location
    Millstone, NJ
    Posts
    1,644
    We have all standard lights but smart outlets that are programmed on a schedule. 1 for the tree and village, 1 for outside lights, and 5 for wreathes in the front rooms. I had used timers previously but getting the times perfect as possible the lights all came on at different times. This all pop on together for outside and a different schedule for interior. Every year for the past 4 I just plug them in and the schedule works from last year.

  6. #6
    Join Date
    Sep 2016
    Location
    Modesto, CA, USA
    Posts
    10,011
    Now is the time to buy those remotes and use them to run a contactor for the dust collector.
    It is also the time for my annual; buy some clear lights and string them up in the attic and crawl space.
    I grew up the Christmas lights were keep together in a dynamite box all in one place.
    Bill D

  7. #7
    Join Date
    Mar 2006
    Location
    SoCal
    Posts
    22,514
    Blog Entries
    1
    My remotes get wire-tied to the receiving device prior to storage. Not help now but may help in the future.
    "A hen is only an egg's way of making another egg".


    – Samuel Butler

  8. #8
    Join Date
    Jul 2005
    Location
    Eastern Iowa
    Posts
    751
    No remotes; timers instead. I have several:
    3’ or longer extension cords -> Simple mechanical outlet timer -> multi-outlet strip/3-outlet tap-> lights

    Not all components are weatherproof so each setup is on a raised box, then covered with an upside-down decorated kitchen trash can (which I use to store the lights in when not used).

    My wife really likes to do Christmas lights inside, too, for the grandkids. Those are also on mechanical timers.
    Comments made here are my own and, according to my children, do not reflect the opinions of any other person... anywhere, anytime.

  9. #9
    Join Date
    Dec 2006
    Location
    Toronto Ontario
    Posts
    11,281
    All the outside front lights, book box and Christmas decorations are on a single photocell controlled circuit.

    All the main floor Christmas lights, tree and Christmas village houses up on the plate rail are on a single dimmer switch.

    It’s the KISS method.

  10. #10
    Join Date
    Oct 2006
    Location
    Minneapolis, MN
    Posts
    5,463
    My parents put their exterior lights on a timer. I believe they just turn off the Christmas tree, and any interior lights when they go to bed. My previous house I had custom built so the exterior outlets were switched specifically for Christmas lights.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •