Bent Lamination Techniques, etc...enjoyable maker

[Phil Gaudio]

Thanks! I have not used this for bent laminations, but I have used it for general purpose joinery: West System T-88 epoxy: very long open time and min. application temp of 35°

Nice table ! You used uni bond 800 but I'm looking for glue that doesn't require 70 + ambient temp. Anyone have any suggestions ? I've done very little bent lamentations the last one I did I used TB 3 gluing up 4 pieces to make up a 3/4" thick radius shelf faces. It worked OK just kinda messy. I'm going to do some wider drawer fronts 4"-6" probably use 6 pieces to get 3/4".
Thanks

[Keegan Shields]

Great channel Jim. Thanks for sharing.

Darren also has a cool jig to sharpen carbide bandsaw blades. Not as fast a Derek’s Dremel jig, but perhaps you’d get more resharpenings out of it.

https://youtu.be/OOyA_5QMBHQ