I am going to be installing some ash t&g in my wife's new home office. I originally wanted to keep the light color of the wood but the ash has turned yellow over time, especially when exposed to sunlight. My plan now is to try to achieve a light amber finish. I do not want to accentuate the grain, however.
111redoak (1).jpg
These samples are red oak, which is very similar to ash.
My finishing experience is limited to wiping varnishes and shellac, but I am open to other suggestions. I have access to a good turbine sprayer and could try that if necessary. I can finish the boards prior to installation or after (the room is currently just drywall and plywood floor.
Any suggestions?