Need some cnc router templates cut

[Kevin Smira]

Unsure if this is the right forum. If not, please move and apologies…

Not asking here for someone to do it (unless you want to quote me), but wondering how to look up folks in my local area to do that. I’ve googled what I believe are good google-able keywords, but not really getting what I want.

Thanks
Kevin

[Michael Burnside]

I'm sure Jim will put this in the CNC sub-forum.

Your local area is hard to say since you're not sharing location. That said, these guys are good for simple to complex machining: https://sendcutsend.com/services/cnc-routing/

[Cary Falk]

If you are in the Portland OR area I can do it for you.

[Kevin Smira]

Apologies all. I’m in Huntsville, AL. I would drive to Nashville as well. I’ve gotten in touch with send, cut, send and I’m e got to convert my svg file into g code for them, as all I got with the pattern was svg

[Bruce Walton]

Many people with a CNC machine would have Vectric's Vcarve or Aspire software. Both can read a SVG file and create the GCode for a given CNC machine.

[Mick Simon]

Apologies all. I’m in Huntsville, AL. I would drive to Nashville as well. I’ve gotten in touch with send, cut, send and I’m e got to convert my svg file into g code for them, as all I got with the pattern was svg

Might be a long shot, but The Alabama Woodworker is in Huntsville and has a CNC router. https://www.youtube.com/@AlabamaWoodworker

[Kevin Smira]

Might be a long shot, but The Alabama Woodworker is in Huntsville and has a CNC router. https://www.youtube.com/@AlabamaWoodworker

Funny you say that. Huy (Alabama woodworker) is a friend of mine. He lives about 10mins from me. We’ve been talking and he could cut it, but he’s got a big project right now and as many of you know, horizontal space always gets covered up…