I have a spent a few weeks on this design for a closet. Mostly had to learn sketchup so time consuming.
There are many tricks I still need to learn!
Anyways, this is my plan and I would love any thoughts on the structure?
I am having trouble with the strategy needed to build this in my third car garage. I will have 9 carcasses to finish as a weekend warrier with a Wagner HVLP gun. Not sure how many sheets of plywood this is but going to deconstruct this into Cutlist Optimizer and see.
Options include:
1) use Melamine (I have not worked with this) to save on finishing with Hardwood faceframes built onto the carcsess once installed and brush painted I guess?
2) build 9 Carcasses, spray a few at a time with primer and 2 coats paint (painful) and keep in basement as I work through this. Build FF's onto cabs in closet.
3) figure out how to spray 8-10 sheets of ply and how to store it while paint cures enough to stack. Then I will only need to paint FF's after building onto cabs in closet.
I am leaning towards #3, perhaps in 2 shifts
Appreciate any thoughts on design or strategy?
my .SKP file I guess is too large to allow posting.
Scott
Closet- working.jpgCloset- working (2).jpgCloset- working (3).jpg