Leigh Super Jig with Bosch Router (+ adapter)

[Luis Reyes]

IMG_1253.jpgIMG_1254.jpgIMG_1255.jpgIMG_1256.jpgHi All,

Hopefully someone here can help me as Leigh tools is closed today. I bought the super 12 jig and have a bosch 1617evs router. I bought the correct adapter (RA1129 template set) for the E7 bushing. I must be doing something wrong because when I install it, the guide bushing doesn't protrude past the base (so effectively has no guide).

Here are some pictures, did I mis-install anything?

Thanks in advance!

[Steve Wurster]

I think the Bosch adapter is installed upside down. It's unfortunately easy to do that because it's not super obvious which way is up. Remove the inner ring using the little lever, unscrew the E7 bushing and install it on the opposite side, then put the whole thing back in.

[Luis Reyes]

That did the trick! Thanks!

I think the Bosch adapter is installed upside down. It's unfortunately easy to do that because it's not super obvious which way is up. Remove the inner ring using the little lever, unscrew the E7 bushing and install it on the opposite side, then put the whole thing back in.

[Steve Wurster]

That did the trick! Thanks!

No problem! Pretty sure I did the exact same thing last time I went to use a guide bushing with mine.