[OP]
Contributor
Laundry Detail this evening...so, the other 3 corners are done. Dryer makes the shop to warm to do much work...
Entire household is down with some sort of bug...
Will see how Sunday goes....
Stay tuned...
BTW: I want to find a way for the tripod to hold the Smart Phone, so I can work, and get steady, in focus photos...Samsung is the brand name.
A Planer? I'm the Planer, and this is what I use
[OP]
Contributor
Photos?
FEB BOX 2, Tripod.jpg
Tripod, needs a bracket to hold the Samsung Smart Phone
FEB BOX 2, side view.jpg
Side view of the new box...all 4 corners are done..
FEB BOX 2, tool kit.jpg
My Dovetail Tool Kit...
FEB BOX 2, 4 corners done.jpg
View from the end of the box...
Hard to tell when the camera is in Movie/Video Mode...had a video that I didn't need..still learning.
Wondering IF the pictures are better focused than the old camera?
A Planer? I'm the Planer, and this is what I use
[OP]
Contributor
Box is now in the clamps, letting it sit a day.
LOTS of clamps...needed the mallet to assemble things, too.
A Planer? I'm the Planer, and this is what I use
[OP]
Contributor
Box No. 2 is sitting in the clamps..
FEB BOX 2, IN the clamps.jpg
And...
Busy Bench, chisels needed sharpened.jpg
These were sharpened back up..along with..
Busy Bench, beater chisels.jpg
These 2 "Beater Chisels"
Bench is a bit messy, right now..
Busy Bench, toolwell.jpg
Need to start putting a few things away...
Still getting the "hang" of using the phone as a camera....
Last edited by steven c newman; 02-25-2024 at 9:09 PM.
A Planer? I'm the Planer, and this is what I use
[OP]
Contributor
Box #2 is out of the clamps..cleaned and squared up...and a 1/4" plywood bottom panel has been glued up...
Ripped a few strips to thicken the lid...
Film when I remember to haul my Phone along to the shop, next time...
A Planer? I'm the Planer, and this is what I use
[OP]
Contributor
Compared to it's "Twin"..
2 marking gauges, twins.jpg
But..seems to need a little something?
2 marking gauges, slight differences.jpg
Maybe add a ruler to the new one?
The Old one is "Special"..
2 marking gauges, show-off.jpg
Show off....No. 65 SW by Stanley..
A Planer? I'm the Planer, and this is what I use
[OP]
Contributor
Clamps and cauls ( almost like "Boots & Saddles"?)
FEB BOX 2, calmps and cauls, bottom panel.jpg
Bottom panel is getting glued in place..
Parts for the "thickened " Lid..
FEB BOX 2, lid parts.jpg
Need to get the Mitre Box out...and cut a few 45 degree corners...then glue these in place.
Stay tuned..
A Planer? I'm the Planer, and this is what I use
[OP]
Contributor
Shop is closed, today...Wife is over in OSU Wexxner Brain & Spine center..and very sick....EMS to the local ER, then transferred to OSU late last night...
Some how, just not in the mood for going to the shop...other than laundry Detail.....
Sorry...
A Planer? I'm the Planer, and this is what I use
Contributor
Hope your wife gets better, soon. Don't worry about us on SMC, family first.
Contributor
Yeah, I hope your wife gets better soon!
DC
[OP]
Contributor
She still has a lot of issues, but, they think she came be released to go home tomorrow,....maybe. Daughter is an RN, so they will send her to my Daughter's house. She is a lot better when we visited last night. We'll see how today goes...
A Planer? I'm the Planer, and this is what I use
Contributor
Really glad to hear that Steven. Hope they release her tomorrow.
Contributor
I'm glad to hear she's doing better!
DC
[OP]
Contributor
Big, old house...gets a bit lonely here....
Got Bored..so..
FEB BOX PIP, Front view.jpg
Installed all the Hardware....
Waiting to see how today goes along....
A Planer? I'm the Planer, and this is what I use
Contributor
Looking good! The Ash looks a bit like the Chestnut I've been working with.
DC
Posting Permissions
Reply With Quote