[OP]
Contributor
Thanks George, yea the contrast is nice for a few reasons, looking good is one
My shop flooring is 20"x20" jack rated floor tiles. They look great, nothing sticks and even though they're only about 1/4" thick and pretty hard, they truly save the feet and knees when I spend long days in the shop.
[OP]
Contributor
I have 6 or 7 drawers to go, but I decided to tackle the worst one last weekend. This one is my Shaper Origin drawer of goodies, which required several different levels and types of milling along with stacking elements. Overall it turned out great but took just over an hour to mill to completion!
Last edited by Michael Burnside; 03-12-2024 at 8:57 PM.
Moderator
Fabulous!!!!!!!!
--
The most expensive tool is the one you buy "cheaply" and often...
Contributor
This is amazing work. If they come out with green secondary im redoing my drawers
Contributor
Lots of colors available: https://www.kaizensource.com/?produc...en-foam-sheetsOriginally Posted by George Yetka
Moderator
True, but that's a higher cost than the bundles at the link the OP provided.
--
The most expensive tool is the one you buy "cheaply" and often...
[OP]
Contributor
Agreed. For the 8 pack it comes in at just under 20 bucks per sheet, shipped!
Member
Your drawers look great, shadowed drawers making finding things so much easier!
On a related note while on active duty , we would put tools in the oven that were calibrated or plastic and drop them into the foam an melt them. Your method is so much better, less mess, no burnt fingers LOL
Posting Permissions
Reply With Quote
