using an old aspire file traced out will show engraving a piece of brass with the fiber laser setup
https://youtu.be/5iPip7nR4Z4
using an old aspire file traced out will show engraving a piece of brass with the fiber laser setup
https://youtu.be/5iPip7nR4Z4
That looks great! Thanks for sharing.
I read recipes the same way I read science fiction. I get to the end and I think, "Well, that’s not going to happen."
you are welcome , I am trying to learn all the new things about mopa fiber laser
and re-using all my old files from 18 in square to now 44 mm square