Page 2 of 2 FirstFirst 12
Results 16 to 18 of 18

Thread: Lots of holes...wrong piece of tooling. "D'oh!!"

  1. #16
    Join Date
    Jan 2007
    Location
    Ottawa, ON Canada
    Posts
    1,473
    Tks, Jim. I put that into Amazon.ca and it sells for $321. So just about double. Adding in our federal taxes, it's just over $360. I'll stay with clamps, screws. CA/blue tape and hot glue. Much of what I would use it for would be hard maple. I don't know if they would penetrate. At least, that's what I'm telling myself.
    Grant
    Ottawa ON

  2. #17
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    65,910
    "Holy Price Difference, Batman!" Sheesh...you need to find a friend across the border to take deliveries for you!
    --

    The most expensive tool is the one you buy "cheaply" and often...

  3. #18
    Join Date
    Mar 2016
    Location
    Millstone, NJ
    Posts
    1,643
    Quote Originally Posted by Grant Wilkinson View Post
    Tks, Jim. I put that into Amazon.ca and it sells for $321. So just about double. Adding in our federal taxes, it's just over $360. I'll stay with clamps, screws. CA/blue tape and hot glue. Much of what I would use it for would be hard maple. I don't know if they would penetrate. At least, that's what I'm telling myself.
    Try searching this on walmart. When I clicked on the link Jim put up My capital one shopping mentioned they had it cheaper. Perhaps they do better over the great north wall than amazon.
    Spotnails CB1538C 15 Gauge Composite Finish Nailer


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •