Hi all - will try to keep it brief. I got this saw, and immediately re-wired for 110 (was 220) as didn't have 220 in the shop then. I let the project sit, and came back (now have 220 installed) and think I re-wired it for 110 incorrectly, or something else is wrong. The TLDR is that it seemingly is not turning off the start relay/capacitor when it should, and is pulling too much current. I actually would think the overload protector would kick in but that wasn't the case. So really, I don't know what should be wired to what anymore and am questioning everything. The motor nameplate has the wiring, but I am curious about the relay/capacitor/overload protector wiring part, which I can't find anything on.
Does anyone have this saw that could snap a pic inside the junction box and help me out? Or is anyone a wiz at motor wiring that could provide some resources of how I should wire the start relay/capacitor/etc? Kind of lost with all of this stuff, so anything helps. Will attach some pics as well
Motor: 438-02-314-0911 115/230volt, 1.5hp motor
439343693_478551181172092_2294388378560254266_n.jpg439107302_478551134505430_8032358077085174851_n.jpgIMG_8337.jpg439338973_478551127838764_5075054404634860956_n.jpgIMG_8342.jpgIMG_8349.jpgIMG_8220.jpg
edit: I guess I can't actually view the pictures so assume some others can't as well, but they are just of the disassembled motor, and the motor faceplate