The church has asked me to give an estimation of how much materials would cost to build some shelves. The shelves are simple plywood painted shelves. The edges are exposed on the shelf itself but not along the vertical standards. There is also a crown molding at the top and a quarter round molding long the bottom. The shelves are 60 inches tall and 40 inch wide and 12 deep and have 3 moveable shelves plus the bottom and top. It has the moveable slot type shelf pins. I think my estimate is high at 155 for 1 and 273 for 2.
Here is the breakdown...Did I screw up somewheres or does this seem right? Sorry about the formatting..tabs dont work.
Estimate for shelf system( 40 inch)
Item number needed price total
3/4 plywood 2 46.65 93.30
¼ plywood 1 17.79 17.79
Quarter round molding 1 stick(8ft) 2.64 2.64
Crown molding 1 stick(8ft) 7.36 7.36
Shelf pins 2( bag of 6) ~5.00 10.00
Shelf standards 4 ~6.00 ~24.00
Misc. screws and glue ~ 5.00
TOTAL 155.09
This does not include paint, and taxes
Estimate for shelf system( 80 inch)
Item number needed price total
3/4 plywood 3 46.65 139.95
¼ plywood 2 17.79 35.58
Quarter round molding 2 stick(8ft) 2.64 5.28
Crown molding 2 stick(8ft) 7.36 14.72
Shelf pins 4( bag of 6) ~5.00 ~20.00
Shelf standards 8 ~6.00 ~48.00
Misc screws and glue ~10.00
TOTAL 273.53
This does not include paint, and taxes.