Has anyone out there ever had any kind of good luck cutting plywood with your laser? I spent the better part of today trying to get a decent cut on 1/8" maple plywood with my 30 watt LaserPro Mercury. Now I admit, this is not the ideal wattage to be cutting wood. But I adjusted speed, power and PPI and still got a lousy charred cut or else it didn't cut all the way through. The laser will cut solid wood like a charm. But it just doesn't like glued up plys. I have read through the Sawmill threads and it seems everyone agrees plywood and lasers just don't get along when it comes to vector cutting. I'm ready to just forget about plywood and use solid wood sheets from now on, except plywood is so much cheaper. And being frugal (cheap?), I hate to spend the extra bucks. If anyone has had good results at laser cutting thin plywood sheets, please post your settings. Thanks!