[OP]
Member
Does any one know the correct size Freud jointer blade for my Jet JJ-6CSX 6 " jointer? I believe Jet recommends the 6&1/16" x 5/8" x 1/8". Freud does not make a 6&1/16' that matches the other dimensions, but they do make a 6" x 5/8" x 1/8". Would this work?
The truth is always visible but often not seen.Measure twice, and cut--WAIT!-- better measure again then cut once, twice or whatever it takes to fit.
Member
I have some on order, if you can wait I'll let you know when they arrive. But they were $11 and change from Amazon during the sale so if they don't work I'll just return them.Originally Posted by Dennis Collins
Does any one know the correct size Freud jointer blade for my Jet JJ-6CSX 6 " jointer? I believe Jet recommends the 6&1/16" x 5/8" x 1/8". Freud does not make a 6&1/16' that matches the other dimensions, but they do make a 6" x 5/8" x 1/8". Would this work?
But I can't see why being 1/8" less in width would be any safety issue since they are the correct thickness and depth for the cutterhead.
Posting Permissions
Reply With Quote