Just to prove there really is some woodworking going on in my shop , I thought I would show what I've been working on the last 2 weekends. I have alluded to a hand tool cabinet I'm making, using only hand tools, in other posts, usually asking for advice. This is the first, of two, raised panel doors, measuring 9" by 36", for the cabinet. Wood is mahogany. They are not glued yet, just dry fit, so the draw bore from the back should tighten the shoulder up a bit. I don't know if that is traditional or not, but since this is a learning project, and for the shop, and I have never done draw bored M & T joints before...I'm going to give it a try. Thanks for looking.
Mark