Got home from the road trip with the Parks Planer. It is a bit bigger and heavier than I imagined a 12" planer would be. I've attached some pictures. The first are of the front and back of the planer. As you can see it will take some TLC.
Parks Close Front.jpg Parks Close Back.jpg
The next are the left and right side. Also, I've included a picture of where the throw-out bearing handle normally goes. This transmission has been modified so the transmission is always in gear. This picture also shows the rust that I will have to contend with inside the transmission.
Parks Left.jpg Parks Other Left.jpg Parks Where Throwout handle goes.jpg
I'll continue with a couple more pictures in the next post.
John