I am thinking about buying a molder but there are a few different ways to go about it. One way is to buy a shop fox molder and that is all it does. Two buy a planer/molder machine like a jet 13" or 15". Option three is to buy a shaper and also buy the molding chucks. Each option is quite exspensive but i could easily benifit from either way. I currently have a 15" planer that i could sell for around 400+ if i go the planer/molder setup plus less space the tools take up by having a combo machine. The only thing i don't like about that way is constantly change the blades. All though i do have a set of planer pals that aid in the changing process. If i went with a dedicated planer which is nice since i won't have to change the blades unless i want a different mold but it is alot of money just for the molder. If i went with the shaper i could benifit from the shaper when i make cabinet doors and things like that but i think this might be the most expensive way since i would have to buy a bunch of bits plus the molder chucks. Also i have a router table that has worked since i only do a kitchen cabinets about 2-3 times a year if that. I keep talking my self into a different setup. I would appreciate your comments and if you have any of these setups please let me know the pros and cons of your setup. Thanks Josh