Fixed base routers - please enlighten me!

[Christian Aufreiter]

Hello folks,

Bosch is introducing a new router, the GMF 1400 CE in Germany (Austria hopefully too). This tool that looks very similar to the Bosch 1617EVSPK Router Package sold in the US is the first fixed base router available in my neck of the woods. So my question is, why would I (someone) want a fixed base router? At what applications would you choose a fixed base over a plunge router?
I understand that some people consider fixed base routers to be advantageous for router tables. But for hand-held work?

Please enlighten me!

Thanks in advance

Christian

[Chris Rosenberger]

I use a fixed base routers more than plunge routers. I like the balance of the fixed base router better. Plunge routers feel top heavy to me. I have 2 fixed base routers that are setup just for dovetail jigs. The only time I use a plunge router is for plunge cuts & if I need to make several cuts to get to a final depth.

[Chuck Saunders]

Gee, I don't know what the advantages are as I have never even used a plunge router. I thought it might be handy though. Fixed base has served me well.
Chuck

[Brian Hale]

Lower center of gravity

Brian

[Jim Becker]

Brian is correct...lower center of gravity and "simpler" setup for tasks that really don't require plunge capability. Examples being dovetail jig work, edge treatments, etc.

[Steve Clardy]

Out of all the routers I have, only one is a plunger base. And seldom used. Just depends on what, how you use them.

[Christian Aufreiter]

Hello guys,

thanks for your input.
If I may summarize your replies, a fixed base router is advantageous at some applications in the terms of ergonomics but probably not a must-have-tool.
Now if I had a plunge router and a fixed base router for edge work would I still want a laminate trimmer?
Of course, I’m aware of the fact that those are different tools but as I don’t own a dovetail jig a fixed base router would be mainly used for rounding over edges and such.

Regards,

Christian

[pat warner]

A little more perspective on a big subject.

[Mark Singer]

I use both....plunge for mortising type joinery. The fixed base is better balanced and great for edge work.... roundovers, camfers, slot cutting.

[Dave Falkenstein]

Hello guys,

thanks for your input.
If I may summarize your replies, a fixed base router is advantageous at some applications in the terms of ergonomics but probably not a must-have-tool.
Now if I had a plunge router and a fixed base router for edge work would I still want a laminate trimmer?
Of course, I’m aware of the fact that those are different tools but as I don’t own a dovetail jig a fixed base router would be mainly used for rounding over edges and such.

Regards,

Christian

Christian - Regarding your question about using a laminate trim router, I find myself reaching for my Porter Cable laminate trim router for most light duty jobs, such as roundovers, bevels and other similar edge trimming. The laminate trim routers are fixed base routers, so I don't see much distinction between the two in that regard. The smaller laminate trim router is simply easier to handle. Of course, I am limited to 1/4 inch bits using the laminate trim router, but for most edge trimming tasks that is not an issue.

[tod evans]

christian, i seldom use a plunge router for much i find they`re top heavy and awkward. my preference is a "d" handled fixed based unit for most hand work. i also have a dedicated laminate trimmer thats sole purpose in life is to drive a 1/8" radius roundover bit. .02 tod

[Mark Rios]

Isn't there a member here that owns about 30 bazillion routers? He might have an opinion. I'll bet he doesn't have to change bits very often....he just keeps different bits in each router and changes routers instead of changing bits.

Me.....I'm doing good if I can just FIND my router.

[Allen Bookout]

Unlike Dave I almost never use my laminate trimmer. I would rather have the extra power of a router and also like the larger base.

Unless you work with very small pieces or need to work very close to a wall or something I see no need to invest in a laminate trimmer in addition to a router.

Allen

[tod evans]

mark, i own 18- 691`s, 5- 7518`s, 4- 310`s and a 7538.......does that count? tod

[Steve Clardy]

I'm not quite up with tod. Have 19 routers. All porter cable. 5 are table mounted, two more in the works. I like dedicated routers.