wood movement Chart?

[Brian Knop]

Anyone know were to get information on movement for different kinds of wood?

Thanks Brian

[David Rose]

Brian, will a fairly small and simple computer program work for you?

Here is the one I use:

http://www.woodcentral.com/bparticles/WoodMove.zip

David

Anyone know were to get information on movement for different kinds of wood?

Thanks Brian

[Brian Knop]

Brian, will a fairly small and simple computer program work for you?

Here is the one I use:

http://www.woodcentral.com/bparticles/WoodMove.zip

David

I have that one, but it does not have quarter sawened oak or poplar!

Brian

[David Rose]

On the Estimated Changes when running with default settings quarter sawn should be the "Tangential Change". At least I have *assumed* that that is what the tangential change meant. It is too much change to be length (with the grain). If you feel I am wrong let me know. I count on that little program!

David

I have that one, but it does not have quarter sawened oak or poplar!

Brian

[dave schaefer]

the last time i ordered some stuff from Lee Valley i got a wood movement reference guide ($4.95) i find it very handy...good luck ds