I have spent a few days reading the various (hundreds of) posts on the LA (or bevel up) jointer (and jack planes) and am 90% sure I am going to purchase the LN LA #7.5 jointer vs. their standard #7 bench jointer.
My main concern is the lack of lateral adjustment on the LA jointer. Has anyone encountered issues here? Conversely, does anyone find joy in the fact that the blade stays "square" in the throat?
I use the new Veritas honing guide so keeping the blade square shouldnt be too much of an issue, but I am curious to know if this is a troublesome feature.
TIA,
Ryan