I finally finished installing a 3hp Super Dust Gorilla in my garage and basement. The cycline unit is in the garage and the duct work runs into the basement shop. As you can see in the pictures the filter is in the basement and the ducts run between the floor joists. It's about as loud as the Jet 1.5 hp I had in the basement with alot better performance. Working with Onieda Air on the duct work plan was a little challenging but they prevented me from making some mistakes with duct sizes. I picked the cyclone up at the factory and got a tour of the place which was impressive, they make some very big systems for commercial use. I built my own stand out of pressure treated 2x4s and used the wall mount on the top of the stand to bolt the cyclone to it. It's plenty strong and cost alot less than the metal stand at Oneida. Overall I'm very pleased with the unit.