The spiny thing is in it's new home and getting a little attention
I recycled some lumber to make a schlick handle and messing with a few other things laying around the shop.
Now you've done it big time. More distractions from the mission.
The spiny thing is in it's new home and getting a little attention
I recycled some lumber to make a schlick handle and messing with a few other things laying around the shop.
Now you've done it big time. More distractions from the mission.
TJH
Live Like You Mean It.
http://www.northhouse.org/
Spin-a-ling-ga-ding-dong!
--
The most expensive tool is the one you buy "cheaply" and often...
Tyler old buddy. How long before your retire from the FAA ATO??? Then you will be spinning all the time. Hey it is looking good.
Bernie
Never put off until tomorrow what you can do the day after tomorrow.
To succeed in life, you need three things: a wishbone, a backbone and a funnybone.
Hey Bernie,Originally Posted by Bernie Weishapl
Only 487 days 3 hours and 20 minutes. But knowbody's counting
After the NINS cluster I'd go today .'
Thanks
TJH
Live Like You Mean It.
http://www.northhouse.org/
There ya go Tyler. I just KNEW my Northern Bro could spin that baby up. Real proud of ya buddy!!!!!
Thanks & Happy Wood Chips,
Dennis -
Get the Benefits of Being an SMC Contributor..!
....DEBT is nothing more than yesterday's spending taken from tomorrow's income.
Hey buddy we have been on NIMS since the onset. Kansas and Nebraska was the test bed for that @##$$%%$## thing. Almost 3 years of that debacle and I almost retired twice over it.
Only 793 days here but heck like you say who is counting. Happy turning buddy. Gett'er done.
Bernie
Never put off until tomorrow what you can do the day after tomorrow.
To succeed in life, you need three things: a wishbone, a backbone and a funnybone.
EXCELLENT progress there Tyler!!! Well done.........and since you ad Bernie are swapping retiremet news........6 months and counting.......
Officially Retired!!!!!!!! Woo-Hoo!!!
1,036 miles NW of Keith Burns
Retirement? 1 year, 1 month, 29 days, 17 hours, 14 minutes...but who's counting???
Nancy
Nancy Laird
Owner - D&N Specialties, Rio Rancho, New Mexico
Woodworker, turner, laser engraver; RETIRED!
Lasers - ULS M-20 (20W) & M-360 (40W), Corel X4 and X3
SMC is user supported. http://www.sawmillcreek.org/donate.php
___________________________
It's nice to be important, but it's more important to be nice.
Retirement. What is that?
17 years, 9 months, and 3 days.
But who's counting?
BTW, Way to get 'er done, Tyler! Keep at it!
Tyler
I've been retired for almost 21 hours and am loveing it.
Those who sense the winds of change should build windmills, not windbreaks.
Dave Wilson
Dave, you must still have the grin on.
I'll admit I am counting: 6 years, 11 days, 1 hour. Looking forward to that same grin!
Tyler, Very Cool that you have those signatures on your lathe
Mike
Last edited by Mike Jory; 11-01-2006 at 5:34 PM.
My Dad taught me to keep my mouth shut and let people think I was stupid, than open it and remove all doubt!
Hey, Now!
Let's get this thread back on topic.
You know - making fun of Tyler.
Or I'll be sending a six pack of Moxie to the next guy who states a retirement date earlier than mine - February 43rd, 2038
Only the Blue Roads
Ya know folks...there are web sites that will supply you with a count-down banner for your signature that you can use to rub it in even harder!! (Like TickerCentral and LillyPie...the gals on the adoption forums use them for all kinds of things...)
--
The most expensive tool is the one you buy "cheaply" and often...
Mike that is the very best part of the whole deal, that these fine artists would take their time to share the time and talents with me. The spinny is greatly appreciated but the hand to hand transfer cross country will inspire me to the grave.Originally Posted by Mike Jory
Thanks
Last edited by Tyler Howell; 11-01-2006 at 5:54 PM.
TJH
Live Like You Mean It.
http://www.northhouse.org/