[OP]
Guest
I obtained a few pieces of aspen from a fellow turner. I was demoing turning at a craft fair on saturday and turned down a piece. Yesterday I finished the bottom and started putting some finish on it, It still needs more sanding and a few more coats but I figured I'd post some pics. Aspen is not fun to turn> No curls just powder..but the figure is amazing.
Attachment 49655 Attachment 49656
4 1/2" wide and 2 3/4" high. the wall thickness is around 3/64". Enjoy
Last edited by Don Baer; 11-30-2006 at 6:05 PM.
Contributor
Don that is a nice looking bowl. You are right it does have some nice grain to it. Nice job Don.
Bernie
Never put off until tomorrow what you can do the day after tomorrow.
To succeed in life, you need three things: a wishbone, a backbone and a funnybone.
Posting Permissions
Reply With Quote