[OP]
Member
I won a log section of Mesquite at my local turning club and here is what I came up with for 1/2 of it.
MesquiteBowlSide.jpg
MesquiteBowlBottom.jpg
MesquiteBowlTop.jpg
The bowl is about 8 1/2 inches in daimeter.
Comments and critiques are always welcome.
Mike Vickery
Member
Dang! you surely made that Mesquite look good. You can be proud of this one.
Last edited by Christopher K. Hartley; 11-15-2006 at 6:42 PM.
Success is the sum of Failure and Learning
Guest
Good job Mike. I like it.
In Memoriam
Aye! And I like it, too.
Only the Blue Roads
In Memoriam
Excellent job! But I think I would use a different background. That one looks "busy" and detracts from the beauty of that nice bowl--especially in the third pic. The bowl itself is very well done.
Member
Member
Nice bowl Mike. It has a nice flowing shape to it. Don't forget to put you John Hancock on that one!
Contributor
Mike I really like that bowl and the wood! Beautiufully done!
Ken
So much to learn, so little time.....
Contributor
Mike like the bowl and like the wood.
Bernie
Never put off until tomorrow what you can do the day after tomorrow.
To succeed in life, you need three things: a wishbone, a backbone and a funnybone.
In Memoriam
Nice bowl Mike
941.44 miles South of Steve Schlumph
TURN SAFE
Posting Permissions
Reply With Quote