I've been asked to build a bookcase measuring 84" tall and 9' 8" wide using Birdseye maple. I have been given about 80 bd. ft. of birdseye maple stock from Michigans Upper Peninsula. A very good friend named Bruce who is a logger and has a sawmill wants to give this bookcase to his wife for a belated Christmas present. He logged off the B/E and milled it at his sawmill.
He wants the 2 outside pieces measuring 24" x 24" to have adjustable shelving for pictures and the center section measuring 66" x 16" to have fixed shelves for books. The bottom areas are for storage and will have raised panel doors. He would like the doors to be made of B/E also but I explained my caution with tearout and he said plain maple would be fine as long as I made the rails and stiles with birdseye. Bruce has given me some leeway so I've been pondering (and asked a couple WW'ing friends their opinions) about using cherry for the raised panels and B/E for the rails and stiles. All the carcase has been made using 3/4" maple plywood per his request, all the face frames will be B/E maple.
Pictures show the face frames already cut to size and passed through the drum sander. I'm not sure how well the B/E will show up but it is highly figured. The next pics show the carcase mocked up to get an idea of size...and the third....I just had to get my mom and dad in on the project.
I will post more on this thread as work progresses.