Bath Cabinet and Stan's Cabinet

[Dan Larson]

Mark, I like the look that you've achieved with the wax finish on the Sheuda... oiled Sheuda becomes so dark it loses some of its liveliness. What type of wax did you use?

Dan

[Mark Singer]

Mark, I like the look that you've achieved with the wax finish on the Sheuda... oiled Sheuda becomes so dark it loses some of its liveliness. What type of wax did you use?

Dan

Dan,
Its kinda' my secret It works amazingly well. Plane , scrape or sand the wood as usuall....if you sand go at least to 220 or 320 grit. If you plane use a light to check for tearout on woods like shedua. Then apply clear Briwax with #0000 steel wool. Panel by panel...don't do too much. Then just before buffing rewax with a light coat and the steel wool...now I use the Festool Rotex on the buffing mode with a small terry towel spinning on the pad..