Sorry i put this on the wrong forum .My old Dewalt is getting tired. Iwould like to replace it with a slider that will cut 1X12 stock. Any input will be a big help. I want this to be the last one I have to buy. thanks
Grumpy
[OP]
Member
Sorry i put this on the wrong forum .My old Dewalt is getting tired. Iwould like to replace it with a slider that will cut 1X12 stock. Any input will be a big help. I want this to be the last one I have to buy. thanks
Grumpy
Last edited by Fred Loeffler; 12-24-2006 at 5:01 AM.
Member
I've got the Bosch 5412L. Haven't had a single problem with it. It was dead on at 0 and both 45s out of the box. It doesn't have quite as much capacity as the Dewalt, but I liked the fence and controls better.
http://www.boschtools.com/tools/tool...31&I=64805&T=1
Where did I put that tape measure...
Member
Fred,
You might want to look here:
http://cgi.ebay.com/ws/eBayISAPI.dll...m=140068933698
Posting Permissions
Reply With Quote