Spalted birch, 3 5/8 high x 4 1/2 wide x less than 1/8 thick, opening is 1 ½, foot is 2 ½. Finish is 2 coats of Watco Natural, several coats of Minwax Wipe-On Poly, Beall buffed.
HF2 Profile.jpg HF2 Side.jpg HF2 Top.jpg HF2 Finial.jpg
Form is a little unorthodox but wanted to make a HF that was different from anything else I have seen. The finial is cherry and not sure if it adds to or subtracts from the overall effect.
So, what are your thoughts about the form? Should I ditch the finial or make another with a different shape?
Any suggestions for a name?
As always, your comments/suggestions are more than welcome.
Thanks for looking.