Euro hinge question

[Jay Goddard]

I’m building some face frame cabinets and plan on using Euro hinges for the first time. My options therefore, are to use a specific face frame hinge or use a standard euro hinge with face frame mounting plate (ex: Blum Compact 33 vs Blum CLIP hinge w/ ff mounting plate). Does anyone have a preference one way or the other?
Pros and Cons seem to be:

<table cellspacing="0" cellpadding="4" border="0">
   <tr>
      <!-- Row 1 Column 1 -->
      <td>
         
      </td>
      <!-- Row 1 Column 2 -->
      <td>
         <b>Compact 33</b>
      </td>
      <!-- Row 1 Column 3 -->
      <td>
         <b>CLIP</b>
      </td>
   </tr>
   <tr>
      <!-- Row 2 Column 1 -->
      <td>
         Opening angle
      </td>
      <!-- Row 2 Column 2 -->
      <td>
         110°
      </td>
      <!-- Row 2 Column 3 -->
      <td>
         107°-170°
      </td>
   </tr>
   <tr>
      <!-- Row 3 Column 1 -->
      <td>
         Price
      </td>
      <!-- Row 3 Column 2 -->
      <td>
         both about the same
      </td>
      <!-- Row 3 Column 3 -->
      <td>
         
      </td>
   </tr>
   <tr>
      <!-- Row 4 Column 1 -->
      <td>
         Adjustment
      </td>
      <!-- Row 4 Column 2 -->
      <td>
         2 way (fixed depth)
      </td>
      <!-- Row 4 Column 3 -->
      <td>
         3 way
      </td>
   </tr>
   <tr>
      <!-- Row 5 Column 1 -->
      <td>
         <b>Depending on overlay:</b>
      </td>
      <!-- Row 5 Column 2 -->
      <td>
         
      </td>
      <!-- Row 5 Column 3 -->
      <td>
         CLIP 120°
      </td>
   </tr>
   <tr>
      <!-- Row 6 Column 1 -->
      <td>
         Door protrusion
      </td>
      <!-- Row 6 Column 2 -->
      <td>
         0 – 1/2”                             
      </td>
      <!-- Row 6 Column 3 -->
      <td>
         7/16”- 13/16”
      </td>
   </tr>
   <tr>
      <!-- Row 7 Column 1 -->
      <td>
         Hinge protrusion
      </td>
      <!-- Row 7 Column 2 -->
      <td>
         3/16” – 1 1/8”                      
      </td>
      <!-- Row 7 Column 3 -->
      <td>
         13/16” – 1 5/32”
      </td>
   </tr>
</table>

The only other disadvantage I can see for the Compact 33 is the built in 3/16” gap between door and face frame. Other than protrusion into the cabinet opening, are there any other practical considerations?