I attempted to view a picture of a tool cabinet a member built. I received a message saying I could not access the page. I was wondering why not?
I attempted to view a picture of a tool cabinet a member built. I received a message saying I could not access the page. I was wondering why not?
John....if it's in the "Plans Forum" only contributors can access the plans and threads in that forum.
Ken
So much to learn, so little time.....
I had that happen to me, but it made me log in again even though I had already logged in. BUT you can't use the back button or when you want to see the next picture it will ask you to log in again.
Only way I have found around it is to check mark the "remember me" box.
I'm having the same problem in ALL forums. Some pics show up but others are only a link that then tells me I have to log in again even though I am logged in.
Jeff
Hate to hijack a thread but:::::::::::::::::::
Aaron Beaver where in Kansas are you? I am in Olathe. Can't help on the problem here.
Randy
Don't worry abuot tommorrow, it may never arrive
Don't fret over yesterdays mistake, you can't undo them
Just live today the best you can.
I have the "remember me check box" checked and most photos and links are available to me. Some are not. The last problem child was this post:
04-09-2007, 12:35 PM
Andrew Williams
2007 Contributor
Join Date: Mar 2007
Location: Binghamton, NY
Posts: 144
I use it to join plywood, and to make various types of frame joinery. this 6-drawer cabinet was made completely with dowelmax. It took a while to do all the drawer webs as well as the side frames, but dowelmax did the job well. The drawer are just old-fashioned dovetails.
http://sawmillcreek.org/attachment.p...2&d=1174494225
I was asked to login, though I was already, I was then logged in sucessfully and welcomed, again, and still could not view the thread. I was returned, again, to the login prompt.
Any help, anywhere?
I am using the Safari Browser on an iMac so you can start bashing and blaming....NOW!
Tom, that URL for the attachment isn't there...404 error for me. What thread is this in?
--
The most expensive tool is the one you buy "cheaply" and often...
Jim,
In the General Woodworking and Power Tools Section, "Dowelmax users please show your work", third post by Andrew Williams, right after your reply to the first.
The link in that post is invalid and apparently points to an attachment that was removed. I took out the link.
Jim
SMC Moderator
--
The most expensive tool is the one you buy "cheaply" and often...
Thanks, Jim.