Results 1 to 11 of 11

Thread: Dumpster Size for Shingles

  1. #1
    Join Date
    Jan 2006
    Location
    Blitzburgh PA
    Posts
    192

    Dumpster Size for Shingles

    I have done some calculating and I believe that I am right but I have found from working on sites before that dumpsters always have a way of filling up with more material than originally planned since there are air gaps (not to mention others helping you fill it at night).

    I have 22 sq of shingles and tar paper to remove for yet another DIY project. I figure that a 9 yd hopper should do the job but I wanted to see if anyone had any first hand info.


    I was working for a contractor about 10 yrs ago for a summer job and we did a roof about the same sq size as this house and he got a ~4 yd hopper and we filled it twice. The reason I want to know is yes I don't want to go way too big and pay more than I have to and not use the space. On the other hand I don't want to be held up on the job waiting for the dumpster to get emptied so that I can finish tear off.

    If you have any experience with this please include a price you paid and the and the size. I'll help me gauge if things are in the ball park.

    Thanks

  2. #2
    Join Date
    Oct 2006
    Location
    Mid Michigan
    Posts
    3,559
    Brian,
    When I had my roof replaced the roofers had a 20 yard box delivered. As it turned out I had to have my roof sheeting replaced so they had to get another box that held 30 yards. They didn't need the whole 50 yards so I got rid of a bunch of stuff that had been laying around since I purchased my place.
    The box rental can be quite expensive depending on your area but I feel that you may be wise to error on the bigger size rather than having to rent a second box. It is also much easier to load the waste material in a larger box.
    David B

  3. #3
    Join Date
    Aug 2006
    Location
    Pleasantville, NY
    Posts
    612
    A contractor friend of mine has his men climb in a rearrange the dumpsters, it recovers a lot of space , and therefore time/money.
    "He who saves one life, saves the world entire"

  4. #4
    Join Date
    Jan 2006
    Location
    Blitzburgh PA
    Posts
    192
    The roof doesn't appear to need any sheathing replaced since there are no visible 'waves' in it, but like any project you don't know for certain until you strip it down and see what all is being hidden from the naked eye. I think that a 10yd will do about 30 sq but I'm not positive.

    The best price I have so far is $275 for a 10yd and I can fill it with 2 tons of junk. I have seen the 15yd for $320 and haul 3 tons in it, as I said I *think* 10 will do but thats why I posted here just to see if I am in the ballpark or need to go larger.

    - Jeremy, thats a good point and I have done that whenever we didn't have a hoe on site to use the hydraulics to compact the load to make sure it wasn't above the top of the hopper. In this case with the sheer number of nails that are going to be in bedded in the scrap shingles I'm not going to risk the possibility of a few nails in the shoe, although I am up to date on my tetnis (sp) shot

  5. #5
    Join Date
    Dec 2006
    Location
    Kanasas City, MO
    Posts
    1,787

    Dumpster Size

    Hey Brian,
    I did about 16 squares on my roof last fall. A 10 yarder is fine. I only about 1/2 filled it. No sheathing stripped, just paper & shingles.
    Now when I stripped the siding, trim, gutters, windows and a 16' X 24' deck.... I had to get a 20 yarder and filled it twice.
    What a nice vacation that all was....well at least having my Dad around for a week was (he lives 1500 miles away). 63 years old and he worked like a young stud along side me 12-15 hours a day for 7 days.

    Greg

  6. #6
    Quote Originally Posted by jeremy levine View Post
    A contractor friend of mine has his men climb in a rearrange the dumpsters, it recovers a lot of space , and therefore time/money.
    I have images in my mind of guys stepping on nails and getting all ripped up on the detritus.

    I wonder what it costs him in labor.

  7. #7
    Join Date
    Aug 2006
    Location
    Pleasantville, NY
    Posts
    612
    Quote Originally Posted by Cliff Rohrabacher View Post
    I have images in my mind of guys stepping on nails and getting all ripped up on the detritus.

    I wonder what it costs him in labor.
    I don't know but he swears buy it .... Just don't tell OSHA
    "He who saves one life, saves the world entire"

  8. #8
    Join Date
    Feb 2003
    Location
    Commerce Township, MI
    Posts
    702
    22 sq. is going to be way more than 2 tons of scrap!

  9. #9
    Join Date
    Jan 2006
    Location
    Blitzburgh PA
    Posts
    192
    Quote Originally Posted by Chris Damm View Post
    22 sq. is going to be way more than 2 tons of scrap!
    a bundle weights about 75 lbs, so 3 to a sq = 225/sq x 20.3 (buying a little more than one sq extra) = 4567lbs ~ 2.23 tons, toss in another hundred lbs for tar paper and it would fall in line closely.

  10. #10
    Join Date
    Dec 2006
    Location
    Central Iowa
    Posts
    192
    Prices must be cheaper out here in the heartland. When I did my siding a 15 yard container was $265 and the 20 yard was $310 so I went for the bigger as insurance since it was a lot cheaper to get the 20 and not need it than to dump the 15 twice.
    Determined to master the skew.....patience is a virtue

  11. #11
    Join Date
    Mar 2003
    Location
    SE PA - Central Bucks County
    Posts
    65,918
    Doug, 8 yard container here is $375 from the least expensive place I found!
    --

    The most expensive tool is the one you buy "cheaply" and often...

Similar Threads

  1. unbelievable dumpster find!
    By Lynn Kasdorf in forum Off Topic Forum
    Replies: 15
    Last Post: 12-04-2006, 8:04 AM
  2. Outboard Thread Size for a Jet 1442
    By Chris Fairbanks in forum Turner's Forum
    Replies: 7
    Last Post: 12-01-2006, 9:00 PM
  3. What size lumber do you WISH you could find?
    By Tom Sontag in forum General Woodworking and Power Tools
    Replies: 5
    Last Post: 06-02-2005, 11:29 AM
  4. Maximizing your table size
    By mike wallis in forum Laser Engraving General Topics
    Replies: 10
    Last Post: 05-30-2005, 1:41 PM
  5. What the size of your workshop?
    By Jim Ketron in forum General Woodworking and Power Tools
    Replies: 77
    Last Post: 10-02-2004, 10:17 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •