I can't remember if I bought this surplus or if it goes to one of my machines. There are no manufacturer markings on it. The guide bar is 3/4" wide and 5/16" tall. The extrusion, bolts, and bar are metric. Any ideas?
[OP]
Member
I can't remember if I bought this surplus or if it goes to one of my machines. There are no manufacturer markings on it. The guide bar is 3/4" wide and 5/16" tall. The extrusion, bolts, and bar are metric. Any ideas?
I'm such a good good boy,
I just need a new toy.
Member
Looks just like the miter gauge that came with my bandsaw.
Where did I put that tape measure...
Member
I agree.... looks like a bandsaw MG.
Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....
Contributor
Looks a lot like my MM E16 miter guage. Is the bar for the slot the normal thickness for a table saw? or shallower? Most BS miter guages are normal depth, but the E16 is non standard. Jim.
Coolmeadow Setters...Exclusively Irish! When Irish Eyes are smiling....They're usually up to something!!
Home of Irish Setter Rescue of North Texas.
No, I'm not an electrician. Any information I share is purely what I would do myself. If in doubt, hire an electrician!
Member of the G0691 fan club!
At a minimum, I'm Pentatoxic...Most likely I'm a Pentaholic. There seems to be no known cure. Pentatonix, winners of The Sing Off, s3.
Member
Yep looks like the one that came with my MM16 BS cept for the bar
Member
looks just like the one that came with my mm16, including the bar.
Howie
Member
yup, MM16 gauge
Guest
looks like the miter guage that came with my MM20
Contributor
Gosh, my MM16 didn't come with a miter gauge
Brian
The significant problems we encounter cannot be solved at the same level of thinking we were at when we created them.
The penalty for inaccuracy is more work
Moderator
Looks nearly identical to the miter gage that came with my MiniMax MM16 bandsaw.
--
The most expensive tool is the one you buy "cheaply" and often...
Member
Mine either! I smell something fishy going on here Brian.Originally Posted by Brian Hale
Gosh, my MM16 didn't come with a miter gauge
Brian
Contributor
Mine either! I smell something fishy going on here Brian.
Things that make you go Hmmmmmm
Hey Mark, wanna get rid of that miter gauge?????
Brian
The significant problems we encounter cannot be solved at the same level of thinking we were at when we created them.
The penalty for inaccuracy is more work
[OP]
Member
Thanks for figuring it out! I bought my MM16 about 3 years ago, put the miter guage on a shelf and forgot all about it.
I'm such a good good boy,
I just need a new toy.
Member
Hey, isn't that what Brian and Larry did? Only they haven't remembered where they put it yet!
Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....
In Memoriam
If he doesn't, may I be the next in line to get rid of mine? If you want it it's yours for the cost of shipping it, but IMHO it's not worth much. I promptly replaced mine with an Incra V27....Hey Mark, wanna get rid of that miter gauge?????
Brian
Use the fence Luke
Posting Permissions
Reply With Quote