Results 1 to 14 of 14

Thread: Woodturning BBQ - Mainer Style

  1. #1
    Join Date
    Aug 2005
    Location
    Benton Falls, Maine
    Posts
    5,480

    Woodturning BBQ - Mainer Style

    This is probably too short of a notice for most folks, and too much of a long haul for the rest of you, but thought I'd put the word out anyway.

    There are a bunch of us up here who have quietly been teaching turning and shoving all comers into the abyss.

    And next Saturday we're having a cookout and turning party. Come one and all. Bring food and/or wood.
    Last edited by Andy Hoyt; 07-08-2007 at 2:55 PM.
    Only the Blue Roads

  2. Maine??? Hmmm... is that in Arkansas?

  3. #3
    Join Date
    Aug 2005
    Location
    Benton Falls, Maine
    Posts
    5,480
    Sorry, Mark. You can't get here from there.
    Only the Blue Roads

  4. #4
    Join Date
    Jun 2006
    Location
    Overland Park, Kansas
    Posts
    189
    Quote Originally Posted by Mark Cothren View Post
    Maine??? Hmmm... is that in Arkansas?
    I think it's just outside of Little Rock, Mark.

  5. #5
    Join Date
    Jan 2004
    Location
    Lewiston, Idaho
    Posts
    28,570
    Andy..........I wish I could be there! I'd even buy the first round of Moxie!
    Ken

    So much to learn, so little time.....

  6. #6
    Join Date
    Jan 2004
    Location
    Lewiston, Idaho
    Posts
    28,570
    Quote Originally Posted by Jeff Moffett View Post
    I think it's just outside of Little Rock, Mark.

    Slightly north and east I believe!
    Ken

    So much to learn, so little time.....

  7. #7
    Man.....Wisconsin is too far on such short notice. Mark, Ken, it's a lil closer to you guys I think. http://www.townofmaine.com/

    Sure wish I could make it.
    Joe
    ------------------------------------------------


    Experience...is simply the name we give our mistakes.

    Oscar Wilde
    .................................................. ..................

  8. #8
    Join Date
    Aug 2006
    Location
    Rio Rancho, NM
    Posts
    2,568
    If I were going to be in the neighborhood, Andy, you KNOW I'd be there, if for nothing more than to refuse your kind offer of Moxie. But since I'll be in Vegas, probably sweltering, I'll think of you and the cold ones you're tossing back, and send a few "loving " words your way. Have a good time and remember, NO PICS, DIDN'T HAPPEN!!

    Nancy
    Nancy Laird
    Owner - D&N Specialties, Rio Rancho, New Mexico
    Woodworker, turner, laser engraver; RETIRED!
    Lasers - ULS M-20 (20W) & M-360 (40W), Corel X4 and X3
    SMC is user supported. http://www.sawmillcreek.org/donate.php
    ___________________________
    It's nice to be important, but it's more important to be nice.

  9. #9
    Join Date
    Feb 2006
    Location
    Bedford County, Virginia
    Posts
    2,325
    Darn it, Andy! You scheduled that on the same weekend as Five Barns! Whatcha go n' do that fer?

  10. #10
    Join Date
    Dec 2004
    Location
    St. Louis
    Posts
    3,349
    Quote Originally Posted by Jeff Moffett View Post
    I think it's just outside of Little Rock, Mark.
    No, its in the bootheel of MO.
    Where did I put that tape measure...

  11. #11
    Join Date
    May 2005
    Location
    Montreal,Quebec
    Posts
    161

    Unhappy

    Dang, 316 miles, no diet Moxie, and me stuck doin' fl*twork in the kitchen...Andy, really wish I could go..maybe next year, or when the diet moxie shows up
    measure, cut, shake head

  12. #12
    Join Date
    Aug 2005
    Location
    Benton Falls, Maine
    Posts
    5,480
    Quote Originally Posted by Ken Fitzgerald View Post
    Andy..........I wish I could be there! I'd even buy the first round of Moxie!
    Ya gotta read the fine print, Ken. It says that the beverages will be supplied. Free Moxie!
    Only the Blue Roads

  13. #13
    Join Date
    Jul 2005
    Location
    East of the Mississippi
    Posts
    3,807
    If only I could.............................
    941.44 miles South of Steve Schlumph

    TURN SAFE

  14. #14
    Join Date
    Dec 2006
    Location
    Crystal Beach,Texas
    Posts
    224
    Ain't Maine in the northeast corner of Texas????

Similar Threads

  1. Old style vs. new style bandsaws
    By Aaron Mills in forum General Woodworking and Power Tools
    Replies: 14
    Last Post: 09-10-2010, 11:03 PM
  2. Shaker style podium?
    By Keel McDonald in forum Design Forum
    Replies: 9
    Last Post: 02-16-2006, 5:38 PM
  3. Ellsworth School of Woodturning -- Part II
    By Jack Hogoboom in forum Turner's Forum
    Replies: 6
    Last Post: 10-27-2004, 7:27 PM
  4. Craftsman woodturning tools
    By Bob Weisner in forum General Woodworking and Power Tools
    Replies: 1
    Last Post: 12-31-2003, 8:07 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •