First question: I installed the Nova G3 last for the first time night and turned on my Jet Mini VS1014. I noticed a slight wobble in the spindle. Should I be concerned about it? If so, what is your experience with WMH Tool Group's customer service and their desire to replace parts? I have only owned the lathe about 9 months.
Second question: I have the lathe plugged into the standard GFCI outlet in the garage (20A I believe). I also have a radio, and fan plugged in and running at the same time. When I have a catch while turning, I trip the circuit almost every time. I realize the immediate answer to this question is to stop the catches but... Should I increase the amperage? This is very frustrating!