Well Dennis Peacock finally dragged me into woodworking, so if I ask any stupid questions you can blame Dennis for it.
I am working on a Shoji divider screen (3 pannel) these days, and since I will be making plenty of joints between 2"X3/4" strips I have decided to go with mortise and tennon joints. I was able to make a tennoning jig for my bench saw, combining the design of a jig I saw at Dennis's shop and a design I saw on the net. Cutting out tennons after that was no sweat. I cut the first mortise by hand, took me about an hour, enlightining experience (as this was my first mortise). But I have to make about 18 of these and cutting them by hand may not be very efficient.
So if you guys have any ideas about a shop made mortising jig I can use with my Porter Cable router it would be great help. The router is a non_plunge/fixed type. I have seen pictures of a horizontal router setup, which seems interesting but haven't found one with detailed plans or multiple pictures.
Any help is appreciated.
Zahid