With a set of sharp knives & the drive system cleaned up & lubricated this older Belsaw machine can still throw out chips. Next thing it a HVAC 4' x 12" register boot to be installed in the top of the hood to hook up the DC to.
With a set of sharp knives & the drive system cleaned up & lubricated this older Belsaw machine can still throw out chips. Next thing it a HVAC 4' x 12" register boot to be installed in the top of the hood to hook up the DC to.
Last edited by Bart Leetch; 07-28-2007 at 11:15 PM.
I usually find it much easier to be wrong once in while than to try to be perfect.
My web page has a pop up. It is a free site, just close the pop up on the right side of the screen
Cool. Very cool.
very nice planer.
Nice to see you got it tuned up and spittin' curlies!
--
The most expensive tool is the one you buy "cheaply" and often...