Well, I've done it again. Small chunk of cherry from John Hart, 5" diameter, 2-1/2" tall, it's thick at about 1/2" (I'm still a chicken), finished with BLO/shellac/friction polish. There were several places where the finish just would NOT shine up, despite my best efforts. Some tearout in the end grain which I wet-sanded with BLO and got filled with the slurry. Did a little something different with the rim. LOML likes it .
IMG_0529.jpg
IMG_0530.jpg
IMG_0531.jpg
IMG_0533.jpg
IMG_0535.jpg
My little signature lasering on the bottom. Again I used the little 1/4" foot on this bowl. Easy to turn and gives a place for the Oneway to grab when doing the inside.
Comments and critiques welcome.
Nancy (133 days)