I've never seen a Clear Vue in person, so I'd love some feedback on this from anyone who has a Clear Vue. Especially if they are familiar with SketchUp.
The drawing is designed to be useful for shop layout. It's not at all adequate for building your own cyclone, but I did try to be as accurate as possible.
The sections are separated in the outline so that the intake and the output sections can both be rotated to fit the space requirements just like the real product. There is an X on top of the motor to rotate around while keeping everything in place.
I am especially confused by the size of the impeller housing. It seemed from my reading that it should be smaller than I drew, but the pictures I looked at showed it the same diameter as the cyclone.
Thanks for taking a look at it and if anyone can tell me about errors that should be corrected, I'd appreciate it. I've talked with Ed Morgano at Clear Vue and he has no problem with posting it to Google's 3D Warehouse, but I want it to be as accurate as reasonably possible first.