I just got an email - but hurry. They only have 100 they said.
peachtree.com
Good luck! Sam
I just got an email - but hurry. They only have 100 they said.
peachtree.com
Good luck! Sam
Do I need 2? My first one had a little mishap when I didn't get a panel bit tightened enough and carved up the base a little. Always said I would get a new one.
Hmmm.....think think think
If over thinking was an Olympic event, I'd win Gold every time!
I destroyed my 2000E by accident. A tiny machine screw was attracted to the powerful magnet, and was stuck near the fan on the amateur. As soon as I turned it on, the screw destroyed one or 2 of the fan blades. The fan was integral to the amateur. The cost of a new amateur was more than I paid for the router from william alden.
??? peachtree.com sends me to a software website. Could you post a link to the actual website? Thanks for the post, Bill
Peachtree is accounting software.
.ptreeusa.com is the site
Thanks, Bill
Sorry. Should have checked:
http://www.ptreeusa.com/edirect_101207.htm
Thanks Sam,I needed another,my old one is about 10 years old now..There's only 99 left!!
Gene
Gosh, all of these deals today... First the DP, now this... The wallet is a little too light today...
Well, I won't say I have buyers remorse, because I havn't really tested it, but I just bought the Hitachi M12v2 (you know, the tennis shoe model) for $118. last month. I probably would have gone with the Freud given the choice.
Great deal, thanks for sharing.
Hi, name is Rick, I just registered. I bought the Freud FT2200E from Woodcraft. I may have jumped too fast, please feel free to give advise. I'm sure it is a nice router, it's just that I jumped fast due to the price and wanting a 3 1/4 HP router for the router table I am about to build. Now I see it does not adjust from the top, and not sure what is the best way to go. I am not really ready to purchase a router lift that cost close to twice what the router cost me. I already have a Borsch 1617EVS with two bases, but wanted a larger router for permanent table mounting. Any advice?